LG F8K5XNK4 Bedienungsanleitung PDF herunterladen (Seite 16)

Connecting the Supply Hose

• Water supply pressure must be between 0.1

MPa and 0.8 MPa (1.0‒8.0 kgf/cm

• Do not overtighten the water supply hose.

• If the water supply pressure is more than 0.8

MPa, a decompression device should be

installed.

• Periodically check the condition of the hose

and replace the hose if necessary.

• Contact the service centre if there is no rubber

seal.

Checking the Rubber Seal on the

Supply Hose

Two rubber seals are supplied with the water

supply hoses. They are used for preventing

water leaks. Make sure the connection to taps

is sufficiently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw the hose connector onto the water

supply tap.

Connecting Screw-Type Hose to Tap

Without Thread

Loose the four fixing screws.

Upper

connector

Rubber

seal

Fixing screw

Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Keine Kommentare

LG F8K5XNK4 Bedienungsanleitung Seite 16