LG F8K5XNK4 Bedienungsanleitung PDF herunterladen (Seite 17)

Push the adapter onto the end of the tap so

that the rubber seal forms a watertight

connection. Tighten the four fixing screws.

Push the supply hose vertically upwards so

that the rubber seal within the hose can

adhere completely to the tap and then

tighten it by screwing it to the right.

Plate

Supply

hose

Connecting One Touch Type Hose to

Tap Without Thread

Unscrew the adapter ring plate and loose

the four fixing screws.

Ring plate

Remove the guide plate if the tap is too

large to fit the adapter.

Guide plate

Push the adapter onto the end of the tap so

that the rubber seal forms a watertight

connection. Tighten the four fixing screws

and the adapter ring plate.

Pull the connector latch plate down, push

the supply hose onto the adapter, and

release the connector latch plate. Make

sure the adapter locks into place.

Latch plate

NOTE

• After connecting the supply hose to the water

tap, turn on the water tap to flush out foreign

substances (dirt, sand, sawdust, and etc.) in

the water lines. Let the water drain into a

bucket, and check the water temperature.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

Keine Kommentare

LG F8K5XNK4 Bedienungsanleitung Seite 17