LG CQ18.NA0R0 Bedienungsanleitung PDF herunterladen (Seite 19)

Installation Manual 19

ENGLISH

Wiring Connection

1. Check that all tubing and wiring are properly connected.

2. Check that the gas and liquid side service valves are fully open.

10. Test Running

Test operation

During the TEST OPERATION, the unit operates in

cooling mode at high speed fan, regardless of

room temperature and resets in 18 minutes.

During

test operation, if remote controller signal is received,

the unit operates as remote controller sets.

If you

want to use this operation, Press and hold the

ON/OFF button for 3~5 seconds, then the buzzer

sound 1 'beep'. If you want to stop the operation,

re-press the button.

On/Off

button

ON/OFF

0.6 sec

1.6 sec 4 sec

Ex ) CH 132

XXO XOX OXX

Operation lamp

Self-Diagnosis Function

This unit has an inbuilt error diagnosis capability. Error is displayed by 'RED' Operation Lamp.

Please contact your serviceman/dealer in such a situation

Prepare remote controller

1. Remove the battery cover by pulling it according to the arrow

direction.

2. Insert new batteries making sure that the (+) and (-) of battery are

installed correctly.

3. Reattach the cover by sliding it back into position.

1. Always use/replace both batteries of same type.

2. If the system is not to be used for a long time, remove the

batteries to save their working life.

3. If the display screen of remote controller starts, fading replace

both of the batteries.

4. Use 2 AAA(1.5 volt) batteries.

NOTICE

1 2 ... 14 15 16 17 18 19 20 21

Keine Kommentare

LG CQ18.NA0R0 Bedienungsanleitung Seite 19