LG LCV5100-BP Bedienungsanleitung

OWNER'S MANUALColor Video CameraPlease read this manual carefully before operating your set and retain it for future reference.MODELLCV5100-BNLC

10ConnectionsBasic connectionThe peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied.1. Make the video signal connect

11Mounting the CameraNote:Refer the manual of Dome bracket adaptor when you mount the camera on the wall, pendant and parapet. Surface mountFollow the

123. Install the camera mounting bracket to the ceiling.FRONTPRODUCT CENTER POSITIONMEZ626877034 PlaceSELFTAPPING SCREWCABLE HOLE (LCV5300)CABLE HOLE

13Installation5. Assemble the camera and the housing. Make sure when you assemble the camera in the right direction. And then, assemble the dome cove

14InstallationImage AdjustmentYou can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor.Notes:• Do n

153. Adjust the pan/tilt/rotate position of the camera.TILTTILTROTATEPA NFARNEARTELEWIDE4. Adjust the zoom.4-1. Unlock the zoom lever.4-2. Move th

16Installation5. Adjust the focus.5-1. Unlock the focus lever.5-2. Move the lever to adjust the focus.5-3. Lock the lever.TILTTILTROTATEPA NFARNE

17Menu OperationLEFTUPRIGHTSETDOWN• UP button:Used to move upper direction on the menu screen. Use this button to select an item or adjust the param-

18Menu Operation-The following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respect

19Menu OperationMain MenuSub MenuContents3D-DNR 0 to 100PRIVACY MASKOFF -ONRECTANGLEMASK SELECTION1 to 8DISPLAYOFF,MOZAIC,COLOR1 to COLOR 8POSITION ,/

2CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDER

20Menu OperationMain MenuSub MenuContentsSYSTEMFACTORY RESET-EXIT TOP/RET/ENDEXITGeneral Operation1. Press [SET] button. The setup menu screen appears

21Menu OperationExposure SettingsYou can set the exposure options using the EXPOSURE menu.1. Select [EXPOSURE] option on the [CAMERA SETTING] menu.2.

22Menu Operationluminance scene. > AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a [ON] or [

23Menu OperationAGC (Automatic Gain Control) settingIf the images are too dark, change the maximum [AGC] value to make the images brighter.1. Select

24Menu OperationSENS-UP settingIf pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture. 1. Use [UP

25Menu Operation• ATW (Auto-Tracing White Balance): Use [LEFT] or [RIGHT] button to select the ATW then press [SET] button. • AUTO: Use [LEFT] or [R

26Menu Operationselect [ON] or [OFF]. > LEVEL: Use [LEFT] or [RIGHT] button to select a level. > DWELL TIME: Use [LEFT] or [RIGHT] button to sel

27Menu OperationOFF on the STATE.• Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. > POSITION,/: Mo

28Menu OperationPrivacy Mask SettingThis function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed i

29Menu Operationof the mask. - SIZE,/: Enlarge or decrease the horizontal size of the mask. - SIZE;.: Enlarge or decrease the vertical size of the mas

3type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.• Holes in metal, through which insulat

30Menu OperationSpecial Menu SettingsThis menu lets you adjust and set up D-ZOOM, D-EFFECT, SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE function by y

31Menu Operation• TILT: Use [LEFT] or [RIGHT] button to move the screen. (up or down)Setting the D-EFFECT (Digital eect) You can select the digital

32Menu OperationSetting the COLORYou can switch the displayed picture to gray scale or color.1. Select [COLOR] option on the [SPECIAL] menu.2. Use [L

33Menu OperationSetting the USER TITLEYou can use the camera identification to assign a number and character to the camera. The USER TITLE is display

34Menu OperationSYSTEM Setting 1. Select the [SYSTEM] menu. 2. Press [SET] button and the [SYSTEM] menu appears.3. Use [UP] or [DOWN] button to sel

35Item LCV5100-BN LCV5100-BPSignal System NTSC PALTotal/Effective Pixels Number 520 000 Pixels / 480 000 Pixels 610 000 Pixels / 570 000 PixelsImage D

36SpecicationItem LCV5100-BN LCV5100-BPDNR 2D + 3D-DNRElectronic Shutter Speed 1/60 to 1/120 000 1/50 to 1/120 000White Balance ATW / AUTO / AWC/SET

4Disposal of your old appliance1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European D

51. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wate

6Power SupplyThis camera must always be operated a AC 24 V or DC 12 V Certified/Listed, class 2 power supply only.Handling of the unitBe careful not t

7Features ... 8Accessories ...

8FeaturesThis Color Video Camera is designed for installation in a video surveillance system.This manual contains instructions on how to install and m

9a Dome Coverb Lens Coverc Focus lock leverFixes the focus position after adjusting. d Zoom lock leverFixes the zoom position after adjusting.e A