LG LCV5300-BP Bedienungsanleitung

OWNER'S MANUALColor Video CameraPlease read this manual carefully before operating your set and retain it for future reference.MODELLCV5300-BNLC

10ConnectionsBasic connectionThe peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied.1. Make the video signal connect

11Mounting the CameraNote:Refer the manual of Dome bracket adaptor when you mount the camera on the wall, pendant and parapet. Surface mountFollow the

123. Install the camera mounting bracket to the ceiling.FRONTPRODUCT CENTER POSITIONMEZ626877034 PlaceSELFTAPPING SCREWCABLE HOLE (LCV5300)CABLE HOLE

13Installation5. Assemble the camera and the housing. Make sure when you assemble the camera in the right direction. And then, assemble the dome cove

14InstallationImage AdjustmentYou can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor.Notes:• Do n

153. Adjust the pan/tilt/rotate position of the camera.TILTTILTPA NFARNEARTELEWIDEROTATE4. Adjust the zoom.4-1. Unlock the zoom lever.4-2. Move th

16Installation5. Adjust the focus.5-1. Unlock the focus lever.5-2. Move the lever to adjust the focus.5-3. Lock the lever.TILTTILTPA NFARNEARTELE

17Menu OperationSETUPRIGHTLEFTDOWN• UP button:Used to move upper direction on the menu screen. Use this button to select an item or adjust the param-

18Menu OperationThe following table shows the list of menu items and options. You can adapt the camera to your requirements by setting up the respecti

19Menu OperationMain MenuSub MenuContents3D-DNR 0 to 100PRIVACY MASKOFF -ONRECTANGLEMASK SELECTION1 to 8DISPLAYOFF,MOZAIC,COLOR1 to COLOR 8POSITION ,/

2CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCKDO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDER

20Menu OperationMain MenuSub MenuContentsSYSTEMFACTORY RESET-EXIT TOP/RET/ENDEXITGeneral Operation1. Press [SET] button. The setup menu screen appears

21Menu OperationExposure SettingsYou can set the exposure options using the EXPOSURE menu.1. Select [EXPOSURE] option on the [CAMERA SETTING] menu.2.

22Menu Operationluminance scene. > AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a [ON] or [

23Menu OperationAGC (Automatic Gain Control) settingIf the images are too dark, change the maximum [AGC] value to make the images brighter.1. Select

24Menu Operation• Set the Shutter OFF when Color Rolling occurs in the indoor scene. Recommend the Shutter Auto in the outdoor scene.SENS-UP settingI

25Menu OperationWhite Balance settingsSelect the method by which the camera shifts its output colors to compensate for the color of a light source.1.

26Menu OperationDay/Night Setting1. Select [DAY/NIGHT] option.2. Use [LEFT] or [RIGHT] button to select mode for Day/Night function.• AUTO: You wil

27Menu OperationMotion Detection SettingThe motion detection detects the moving objects in the scene by monitoring changes in brightness level. You ca

28Menu Operation3D-DNR Setting1. Select [3D-DNR] option. If pictures are not clear due to brightness, this option would reduce the noise of picture.2

29Menu Operation > Use [UP] or [DOWN] to select an option then use [LEFT] or [RIGHT] button to adjust the option. - POSITION,/: Moves horizontal po

3type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.• Holes in metal, through which insulat

30Menu OperationNotes:• You can adjust the mask color manually except for COLOR 8.• RED, GREEN, BLUE and TRANSPARENCY adjustments are applied in com

31Menu OperationSetting the D-ZOOM (Digital Zoom ) level You can select the digital zoom level.1. Select [D-ZOOM] option on the [SPECIAL] menu. 2. Us

32Menu OperationSetting the SHARPNESS eectThe degree to which the boundary of the two portions is clearly distinguished.1. Select [SHARPNESS] option

33Menu OperationSYNC Setting1. Select [SYNC] option on the [SPECIAL] menu.2. The [SYNC] option is set to [INT] automatically.Note:AC24V Adaptor have

34Menu Operation• A (Blank): Inserts a space at the cursor position.• / : Moves cursor to left or right.LANGUAGE SettingSelect the viewer language

35Item LCV5300-BN LCV5300-BPSignal System NTSC PALTotal/Effective Pixels Number 520 000 Pixels / 480 000 Pixels 610 000 Pixels / 570 000 PixelsImage D

36SpecicationItem LCV5300-BN LCV5300-BPDNR 2D + 3D-DNRElectronic Shutter Speed 1/60 to 1/120 000 1/50 to 1/120 000White Balance ATW / AUTO / AWC/SET

4Disposal of your old appliance1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European D

51. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wate

6Power SupplyThis camera must always be operated DC 12 V or AC 24 V. Certified/Listed Adaptor which comply with LPS.Handling of the unitBe careful not

7Features ... 8Accessories ...

8FeaturesThis Color Video Camera is designed for installation in a video surveillance system.This manual contains instructions on how to install and m

9a Dome Coverb Lens Coverc Focus lock leverFixes the focus position after adjusting. d Zoom lock leverFixes the zoom position after adjusting.e R