Appendix42
Appendix
5
Troubleshooting
General
Symptom Cause & Solution
No Power.
�
Plug the power cord into the wall outlet securely.
Cannot play movie, photo or
audio les.
�
The les are not recorded in a format that the unit can play.
�
The unit does not support the codec of the video le.
The remote control does not
work properly.
�
The remote control is not pointed at the remote sensor of the unit.
�
The remote control is too far from the unit.
�
There is an obstacle in the path of the remote control and the unit.
�
The batteries in the remote control are exhausted.
�
We recommend using alkaline batteries.
The connected USB storage
device is not recognized.
�
Try another dierent USB cable, some of USB cable may not support
enough current for normal USB operation.
�
If you use a USB extension cable or USB HUB, the USB devices may not
be recognized.
�
An USB device which requires additional program installation when
you have connected it to a computer is not supported.
�
This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
Picture
Symptom Cause & Solution
There is no picture.
�
Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
�
Your TV may not support the resolution you have set on the unit.
Change the resolution that your TV accepts.
�
The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears.
�
Set the resolution which your TV accepts.
Kommentare zu diesen Handbüchern