LG VR6480VMNC Bedienungsanleitung PDF herunterladen (Seite 57)

CLEANING THE SIDE BRUSH

Foreign objects/materials such as hair can easily adhere to the

side brush. Remove such materials at least once a week.

If excessive amounts of foreign materials are stuck to the brush,

there is the risk of damage to the brushes.

If the ﬂoor is rough or frequently cleaned, the side brushes may bend or become deformed. In this

case, use the following method to straighten the side brush.

1. The following procedure is helpful in restoring

deformed brushes.

2. Turn off the power by switching the main

switch off on the rear off the unit.

3. Place the Robot Cleaner at the end of a table

to make cleaning the side brush easier. Make

sure that the Robot Cleaner is not in danger of

falling.

4. Soak the side brush in warm to hot water.

5. Press down on the side brush for about ten

seconds so that it is completely submerged in

the water.

6. Slowly wipe the side brush by sliding it through

your hand.



each section of the brush.

8. Use the side brush only after it has completely

dried.

1. Remove the screws by using a suitable screw driver

and separate the Side Brush from the main unit.

2. Remove any hair after the separation.

3. Assemble the Side Brush by replacing it onto the

bottom of the Robot Cleaner, with the 'R' and 'L'

marking of the Brush matching the counterparts

on Robot Cleaner.

Side Brush management

Charging terminals

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 131 132

Keine Kommentare

LG VR6480VMNC Bedienungsanleitung Seite 57