LG VR6480VMNC Bedienungsanleitung PDF herunterladen (Seite 53)

CLEANING THE DUST BIN



not covered by warranty.



If you initiate cleaning, with no filters fitted to the dust bin or Filter Cover not assembled,

a voice message will be announced which says "Please check if the dust bin is installed

with the filter."



cleaning the dust bin so that it closes easily and accurately.

Tip

1. Open the dust bin compartment cover by



Cleaner.

2. Grab the handle of the dust bin and pull it

upward.

3. Pull the hook on the left of Filter Cover on the

rear of Dust Bin to separate the ﬁlter and the

sponge.

※



dust dropping.

※

Refer to p.52 when cleaning the Dust Bin

Filter.

4. Lift the dust bin lid upward while pressing the

separation button on the dust bin.

5. Empty the dust bin and clean it with a cleaning

brush or under running water.

6. After cleaning with water, completely dry the



direct sunlight.

7. When reassembling or ﬁtting the cleaned Dust

Bin, close the lid and put in the Sponge and

EPA Filter.

※

Refer to p.52 for detailed assembly guides.

8. Put the dust bin into the Robot Cleaner and

close the dust bin compartment cover.

If the dust bin is full, suction power can be reduced. Clean the dust bin before or after each cleaning

session. Clean the dust bin using the following sequence:

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 131 132

Keine Kommentare

LG VR6480VMNC Bedienungsanleitung Seite 53