LG F1255RDS27 Bedienungsanleitung PDF herunterladen (Seite 13)

1. Unscrew the adapter ring plate and

the 4 adapter retaining screws.

2. Remove the guide plate if the tap is

too large to fit the adapter.

3. Push the adapter onto the end of

the tap so that the rubber seal forms

a watertight connection.

Tighten the adapter ring plate and

the 4 screws.

4. Pull the connector latch plate down,

push the inlet hose onto the adapter,

and release the connector latch plate.

Make sure the adapter locks into place.

Please use the horizontal tap

Horizontal tap Extension tap Square tap

Ring plate

Guide plate

Latch plate

Type-C : Connecting one touch type hose to tap without thread



Step3: Connect hose to washer

• Make sure that there are no kinks in the

hose and that they are not crushed.

Installation

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps.

Use the most conventional type of faucet for water supply. In case the faucet is square or

too big, remove the spacing ring before inserting the faucet into the adaptor.

NOTE

• After connecting inlet hose to water

tap, turn on the water tap to flush

out foreign substances (dirt, sand or

sawdust) in the water lines. Let

water drain into a bucket, and

check the water temperature.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Keine Kommentare

LG F1255RDS27 Bedienungsanleitung Seite 13