LG LVC-S60HM Bedienungsanleitung

Operating InstructionsLVC-S60HMLVC-S60HPLVC-S60NMLVC-S60NPBefore installing and using the camera,please read these instructions thoroughlyand retain t

10This camera is mounted with tripod which makes it possible to install from both ofthe bottom and the top of the unit as illustrated.INSTALLATION OF

11SpecificationsModel LVC-S60HM LVC-S60HP LVC-S60NM LVC-S60NP Signal System NTSC PAL NTSC PALTotal/Effective Pixels 410K/380K 470K/440K 270K/250K

P/NO.: 3834RC0022Q

2Regulatory Notices For U.S.AThis equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of t

ContentsFeatures ...3Ca

4Power SupplyThey must be operated with a AC 24V class 2power supply and DC12V alternatively.* Notes: Be careful of AC frequency when the camera is op

51 Tripod adapter2 CCD cover3 Dip switches4 Line phase adjustment volume5 Lens selection switch6 DC iris level adjustment volume7 Back focus lock scre

The Adjustment method of Line Lock PhaseWhen using a camera switcher to connect 2 cameras ormore to one monitor, there may be a vertical roll of theim

7CONNECTIONSPower Connection LVC-S60 (DC12V/AC24V Compatible) 1. DC 12V Power Supply Remove the insulation on the power cable as illustrated andconnec

Lens MountingRemove the CCD cover. Then attach the CS mount lens to the camera. Pleaserefer to the drawing on the left. C Mount Lens: You have to use

9If back focus has to be adjusted after mounting the lens,1. Loosen the back focus lock screw(1) on top of the camera with a (+) screwdriver2. Turn th