LG OLW480B Bedienungsanleitung PDF herunterladen (Seite 7)

ENGLISH

Installing the Wall Mounting Bracket

- It is recommended that you install this product only on concrete walls. Issues that may arise due to installation

on other materials (walls made of wood, plywood, bricks, etc.) will not be covered.

Wall Mounting Screw

→ Position the wall mounting bracket in the

desired spot, mark the screw holes, and remove

the bracket.

→ Refer to the image below on how to fix the wall

mounting bracket in place.

→ Use a leveler to check whether the wall mount

is level.

→ If you are unable to tighten the screws in their

specified points, you can fasten them in other

adjacent points. However, do not change the

locations of two or more points.

→ Fix two wall mounting screws in the upper left

and two wall mounting screws in the upper

right. Fix one screw in the lower left and one

screw in the lower right.

→ Use a Phillips screwdriver (manual or electric)

or an 8 mm spanner on the screws so that the

wall mounting bracket completely touches the

wall.

Attaching the TV to the Wall Mounting Bracket

- Two or more people are needed to lift the product.

（

* Caution: Make sure that the power cord does not get

trapped between the wall mounting bracket and the set

during installation.

(A trapped power cord may cause damage to the product.)

→ Place the product on the wall in the direction of the arrow with the guide spacers in the wall mounting bracket.

Attach the lower part first, then attach the upper part by slightly lifting up the set.

- Make sure that the product is fixed securely in place by pulling on the bottom of the set.

- If speakers have been attached to the product, lift it by holding the product itself, not the speakers.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

LG OLW480B Bedienungsanleitung Seite 7