LG PHLTA.ENCXLEU Bedienungsanleitung PDF herunterladen

MODELS: PHLTA, PHLTC

Do not drop water on to the product. It may

cause an electric shock or product

breakdown.

If the product was submerged under water,

ask the service center for instruction. It may

cause fire or an electric shock unless you

do that.

For electrical work, contact the dealer,

seller, a qualified electrician, or Authorized

Service Center.

Safety Precautions

Use the original parts in order to prevent

fire, an electric shock, explosion, and

product breakdown.

Keep combustible and/or inflammable

materials away from the product in order to

prevent fire or product breakdown.

ELB(Earth Leakage Circuit Breaker)should

be Installed for safety.

Entrust installation of the product to the

service center because improper

installation may cause fire, an electric

shock, explosion, and physical injury.

Do not disassemble, repair, or modify the

product at your discretion in order to

prevent fire or an electric shock.

Do not install the product in wet and humid

areas in order to prevent product

breakdown.

■ Installation

WARNING

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by

the following indications.

WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Safety Precautions

Make sure children or senor

citizens use the product

under proper observation in

order to prevent safety

accident.

Do not subject the product

to shock. It will cause

product breakdown.

Do not pick the product with

a sharp tool. It may cause

product breakdown with the

damage to its parts.

Do not clean the product with strong

cleanser such as solvent. Use soft clothes

in order to prevent fire or product

deformation.

Do not touch the product with a wet hand.

Do not pull the lead cable. It may cause

product breakdown or an electric shock.

CAUTION

Part Description

Thermistor sensor

12m(1EA)

Fixing screw for

Remote Sensor(2EA)

ELB(MCCB) & Relay contactor

Installation

1 Phase Relay Bracket

Ralay Scerw (2EA)

3 Phase Relay Bracket

Manual Cable 4EA

(For connecting ELB(MCCB)

with terminal block)

Installation Method

How to Install Sanitary Water Tank Kit

Follow below procedures Step 1 ~ Step 5.

Step 1. Find magnetic switch and ELB(MCCB) in the kit. Fit them into the indoor unit

control box with enclosed a braket and screws. (symbol ʶ at picture)

Step 2. Connect ‘CN_B/HEAT(A)’ (White Connector) of the indoor unit PCB with

magnetic switch contact using enclosed cable (symbol ʷ at the picture).

Connect magnetic switch contactor port no. A1 and A2.

Step 3. Connect magnetic switch contactor port no. L1 and L3 with ELB(MCCB) port

no. 2 and 4.(symbol ʸat the picture).

Check Polarity

• Connect magnetic switch contact port no. L1 to ELB(MCCB) port no. 2

• Connect magnetic switch contact port no. L3 to ELB(MCCB) port no. 4

Step 4. Connect Magnetic switch contactor port no. T1 and T3 with terminal block 1

port 6 and 7. (symbol ʹat the picture).

Check Polarity

• Connect magnetic switch contact port no. T1 to terminal block 1 port 6

• Connect magnetic switch contact port no. T3 to terminal block 1 port 7

Step 5. 1Ø Electric Heater

Connect ELB(MCCB) port no. 1 and 3 with block 3 Port 3 and 4.(symbol E at

the picture).

3Ø Electric Heater

Connect ELB(MCCB) port no. 1 and 3 with block 3 Port 1 and 2.(symbol E at

the picture).

Check Polarity

• Connect ELB port no. 1 to terminal block 3 port 3

• Connect ELB port no. 3 to terminal block 3 port 4

• Connect MCCB port no. 1 to terminal block 3 port 1

• Connect MCCB port no. 3 to terminal block 3 port 2

CAUTION

Installation Method

Relay contactor

port no. assignment

2 4

ELB(MCCB)

port no. assignment

3Ø Electric Heater1Ø Electric Heater

Terminal

Block 3

Terminal

Block 1

Terminal

Block 1

Terminal

Block 3

Installation Method

Step 6. Find sanitary water tank sensor. Connect it to ‘CN_TH4’ (Red Connector) of the

indoor unit PCB. The sensor wire should be passed through sensor holes. The

sensor should be mounted correctly to the sensor hole of sanitary water tank.

Sensor mounting

Insert sensor into sensor socket and bolt it tightly.

CAUTION

Sanitary Water

(Thermistor sensor)

Tank

Inhaltsverzeichnis

Seite 1 - Installation Method

MODELS: PHLTA, PHLTCDo not drop water on to the product. It maycause an electric shock or productbreakdown.If the product was submerged under water,as

Kommentare zu diesen Handbüchern

Keine Kommentare

LG PHLTA.ENCXLEU Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein LG PHLTA.ENCXLEU herunter. LG PHLTA.ENCXLEU Owner's manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein LG PHLTA.ENCXLEU