LG 55SM5D-B Bedienungsanleitung PDF herunterladen (Seite 96)

ENGLISH

Picture ID

Picture ID is used to change the settings of a specific set (display) using a single IR receiver for multi-vision.

Communication is possible between a monitor with an IR receiver and other monitors using RS-232C cables. Each

monitor is identified by a Set ID. Setting Picture ID allows you to only use the remote control with monitors with a

Set ID that matches the Picture ID.

1 Assign Set ID to the installed monitors as shown below:

AUDIO

(RGB/DVI)

REMOTE

CONTROL IN

RS-232C OUT

RS-232C IN

RS-232C OUT

RS-232C IN

RS-232C OUT

RS-232C IN

IR & Light Sensor

RS-232C Cable

Picture ID On [2]

Press the red Picture ID On button on the remote control.

Make sure that the Picture ID you set is identical to the Set ID of the monitory you wish to control.

• A set with a Set ID that is different from the Picture ID cannot be controlled by IR signals.

NOTE

• If Picture ID has been set to 2, only the upper right monitor, which has a Set ID of 2, can be controlled by IR

signals.

• If you press the green Picture ID Off button on your remote control, the Picture ID for all monitors are turned

off. If you then press any button on the remote control, all monitors can be controlled by IR signals regardless of their

Set ID's.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 124 125

Keine Kommentare

LG 55SM5D-B Bedienungsanleitung Seite 96