LG LH70-A Bedienungsanleitung PDF herunterladen (Seite 2)

1. Press [PRESET/FOLDER +/- ] on the remote control repeatedly until a desired index number of folder appears.

2. Press

d/M

on the unit or remote control to play it. The first file of the folder will play.

Selecting a folder

Auto power down

This unit will turn itself o to save electricity in the case

were the main unit is not connected to an external

device and is not used for 20 minutes.

The unit will also turn itself o after six hours if the

Main unit has been connected to another device using

the analog inputs.

Product type:

2.1 speaker system

Power Supply

Refer to the main label.

Power Consumption

20 W

Dimensions (W x H x D):

Satellite: Approx. 110 (W) mm x 201 (H) mm x 115 (D)

Subwoofer: 264 (W) mm x 370 (H) mm x 323 (D) mm

Net Weight:

Main Set : Approx. 5.44 kg

Speaker (1EA) : Approx. 0.64 kg

Operating Temperature:

0 °C to 35 °C

Connectivity:

3.5mm stereo jack-male input jack

Tuner:

FM Tuning Range : 87.5 to 108.0 MHz or 87.50 to

108.00 MHz

Impedance:

Subwoofer: 6 (Ω)

Satellite: 8 (Ω)

Frequency response

Subwoofer: 55 Hz~ 104 Hz

Satellite: 40 Hz ≤ 20 kHz

Total Max. power

70 W (THD : 10 %)

Signal to noise ratio

75 dB

Design and specifications are subject to change

without notice.

Specication

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

dangerous voltage within the product’s

enclosure that may be of sucient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: The apparatus shall not be exposed to water (dripping

or splashing) and no objects lled with liquids, such as vases, shall

be placed on the apparatus.

WARNING: Do not install this equipment in a conned space such

as a book case or similar unit.

CAUTION: Do not use high voltage products around this product.

(ex. Electrical swatter) This product may malfunction due to

electrical shock.

CAUTION: Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Slots and openings in the cabinet are provided for ventilation and

to ensure reliable operation of the product and to protect it from

over heating. The openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar surface. This product

shall not be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated

circuit;

That is, a single outlet circuit which powers only that appliance and

has no additional outlets or branch circuits. Check the specication

page of this owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged wall outlets,

extension cords, frayed power cords, or damaged or cracked wire

insulation are dangerous.

Any of these conditions could result in electric shock or re.

Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it,

discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized service center. Protect

the power cord from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and the point where the

cord exits the appliance.

The Power Plug is the disconnecting device. In case of an

emergency, the Power Plug must remain readily accessible.

NOTICE: For safety marking information including product

identication and supply ratings, please refer to the main label on

the bottom or rear of the apparatus.

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the

equipment: Remove the old battery or battery pack, follow the

steps in reverse order than the assembly. To prevent contamination

of the environment and bring on possible threat to human

and animal health, the old battery or the battery put it in the

appropriate container at designated collection points. Do not

dispose of batteries or battery together with other waste. It is

recommended that you use local, free reimbursement systems

batteries and accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

Listening to the radio

1. Press [FM/AUTO SCAN] on the remote control or [FUNC.] on the unit until FM appears in the display

window.

The last received station is tuned in.

2. - Auto tuning: Press [TUN.-/+] on the remote control or [TUNING -/+] on the unit for about 1

second until the frequency indication starts changing, then release. scanning stops when the unit

tunes in a station.

- Manual tuning: Press [TUN.-/+] on the remote control or [TUNING -/+] on the unit repeatedly.

3. Adjust the volume by using [VOL +/-] on the remote control or the unit.

Radio Operation

ANTENNA

Presetting Radio Station

FM antenna

Be sure to fully extend the FM wire antenna before using the radio function.

Before tuning, make sure to turn down the volume.

Press

d/M

on the remote control. This will change the tuner from stereo to mono.

Then the FM reception will be better than before.

No Power

The power cord is not plugged in. Plug in the power

cord.

Check whether electricity failed. Check the condition

by operating other electronic devices.

No sound and sound distortion

The unit or your external device’s volume is set to

minimum. Check and adjust the volume of the unit.

When you use external device at high volume,

the sound quality may be deteriorated. Lower the

volume of device.

If you use the unit for purposes other than listening

to music, the sound quality may be lowered or the

unit may not work properly.

The USB device does not start playback

An unplayable USB device is inserted. Check the USB

device.

Check whether you selected right function. Pressing

[FUNC.] button and check the selected function.

Radio stations cannot be tuned in properly.

The antenna is positioned poorly. Adjust its position.

The signal strength of the radio station is too weak.

Tune to the station manually.

No stations have been preset or preset stations have

been cleared (when being tuned by scanning preset

channels). Refer to

Presetting Radio Station

The remote control does not work properly.

The remote control is not pointed at the remote

sensor of the unit. Point the remote control at the

remote sensor of the unit.

The remote control is too far from the unit. Operate

the remote control within about 23 ft (7 m).

There is an obstacle in the path of the remote

control and the unit. Remove the obstacle.

The battery in the remote control is exhausted.

Replace the battery with new one.

Cleaning the unit

To clean the player, use a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth

lightly moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine,

or thinner, as these might damage the surface of the

unit.

Troubleshooting

USB Folders/Files are recognized as below.

File will be played from

le No.1 to

le No.14 one by one.

The Index number of folder will be presented in order recorded and may be presented dierently according to

the recording circumstances.

*ROOT : The rst screen you can see when a computer recognizes the USB is “ROOT”.

Presetting the Radio Stations

1. Press [FUNC]on the remote control or [FUNC.] on the unit until FM appears in the display window.

2. Select the desired frequency by pressing [TUN.-/+] on the remote control or [TUNING -/+] on the unit.

3. Press [PROGRAM/MEMORY]. A preset number will blink in the display window.

4. Press [PROGRAM/MEMORY]. The station is saved.

5. Repeat steps 2 to 4 to store other stations. You can preset up to 50 stations for FM.

6. To listen a preset station, press [PRESET/FOLDER +/-].

Using AUTO SCAN

1. Press [FM/AUTO SCAN] on the remote control for longer than 2 seconds, all of the FM bands are scanned.

2. Radio frequencies are saved automatically by preset number while FM bands are scanned.

3. To cancel the scanning, press

or convert to other function. It will be cancelled.

Deleting a saved Preset station

1. Select a desired Preset by pressing [PRESET/FOLDER -/+] and press [DELETE] on the remote control.

2. The selected Preset number will be blinked.

3. Press [DELETE] on the remote control to erase the saved preset number.

Press and hold [DELETE] to erase all saved radio stations.

1 2

Kommentare zu diesen Handbüchern

Keine Kommentare

LG LH70-A Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radios LG LH70-A