LG 24MT47D-PZ Bedienungsanleitung PDF herunterladen (Seite 7)

ENGENGLISH

Euro scart connection

Transmits the video and audio signals from an external device to the

TV set. Connect the external device and the TV set with the euro scart

cable.

Output

Type

Current

input mode

AV1

(TV Out

)

Digital TV Digital TV

Analogue TV

Component, AV, HDMI, RGB

1 TV Out : Outputs Analogue TV or Digital TV signals.

NOTE

Any Euro scart cable used must be signal shielded.

Connecting to a PC

Your TV supports the Plug & Play* feature and has the built-in speakers

with Virtual Surround that reproduces sound clearly with a rich bass.

* Plug & Play: The function when a PC recognizes a connected device

that users connect to a PC and turn on, without device conguration

or user intervention.

NOTE

If you want to use HDMI-PC mode, you must set the Input

Label to PC mode.

The OSD (On Screen Display) is displayed on the screen as

shown below.

» When turning the product on in HDMI input.

» When switching to HDMI input.

Is the input connected to your PC?

Do not show message again

Yes No

If you select "Yes" the size and image quality are optimised for

your PC.

If you select "No" the size and image quality are optimised for

the AV device (DVD player, set-top box).

If you select "Do not show message again" this message

does not appear until the TV is reset. You can change the set

value in SETTINGS INPUT Input Label.

The values set for HDMI1/HDMI2 are saved independently.

(Only MT57*, MT77*)

Connections (notications)

Connect various external devices to the TV and switch input modes

to select an external device. For more information about an external

device’s connection, refer to the manual supplied with each device.

Available external devices are: HD receivers, DVD players, VCRs, audio

systems, USB storage devices, PC, camcorders or cameras, gaming

devices, and other external devices.

NOTE

The external device connection may differ from the model.

Connect external devices to the TV regardless of the order of

the TV port.

If you record a TV programme on a DVD recorder or VCR, make

sure to connect the TV signal input cable to the TV through a

DVD recorder or VCR. For more information of recording, refer

to the manual provided with the connected device.

Refer to the external equipment’s manual for operating

instructions.

If you connect a gaming device to the TV, use the cable

supplied with the gaming device.

In PC mode, there may be noise associated with the resolution,

vertical pattern, contrast or brightness. If noise is present,

change the PC output to another resolution, change the refresh

rate to another rate or adjust the brightness and contrast on

the PICTURE menu until the picture is clear.

In PC mode, some resolution settings may not work properly

depending on the graphics card.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).

Use a signal splitter to use more than 2 TVs.

If the image quality is poor, install a signal amplifier properly

to improve the image quality.

If the image quality is poor with an antenna connected, try to

realign the antenna in the correct direction.

An antenna cable and converter are not supplied.

Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,

HE-AAC

Satellite dish connection

(Only MT57V, MT77V, MT47V)

Connect the TV to a satellite dish to a satellite socket with a satellite

RF cable (75 Ω).

Other connections

Connect your TV to external devices. For the best picture and audio

quality, connect the external device and the TV with the HDMI cable.

Some separate cable is not provided.

USB port supports 0.5 A electric current. If you need more

electric current in case of HDD, use the separate power adaptor.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

LG 24MT47D-PZ Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für LED-Fernseher LG 24MT47D-PZ