LG GA-B379UVQA Bedienungsanleitung PDF herunterladen (Seite 7)

REPLACEMENT OF DOOR OPENING TYPE

-7-

Precaution

Before reversing the door, first of all, you should take out food

and accessories like shelves or trays which arenot fixed in the

fridge-freezer.

Use Torque Wrench or Spanner to fix or remove the bolt.

Do not lay the fridge-freezer down. This will cause problems.

Be careful not to drop the doors in disassembling or assembling.

How to Reverse the Door

1. Separate the screw after separating the nut on the

left of the refrigerator door handle , then separate the

refrigerator door handle . Separate the freezer door

handle in the order in which you separating the refrigerator

door handle . (The hidden handle does not need this

procedure)

2. Separate the screw and bottom cover , then separate

the cap of bottom cover and install it on the

corresponding position on the right side. Separate the

hinge lower right and the pin after separating the

screw . Install the bolt into the corresponding left hole

on the hinge lower. Separate the freezer door , then

remove the CAP on the door and install it on the

corresponding position on the right side. Separate the door

stop after your separating the screw , then install the

door stop on the corresponding position on the left.

2 1

3. Separate the cover of hinge upper , separate the two

wire . Separate the screw , separate the hinge middle

, then separate the refrigerator door .Separate cap

and install it on the corresponding position on the right.

Separate the door stop after your separating the screw

, then install the door stop on the corresponding position

on the left. Separate the screw , then separate the hinge

upper right (Hinge Upper) .

1 8

2 3

4. Remove two small caps on the front of the cover front

with a screw driver, then separate the screw and . Separate

the cover front . Move the wire to left, install the cover

front and the screw. Take the small caps out of the alternate

bag, then install the small caps.

Note: It’s unnecessory to change door switch wire .

Remove the small cap of the refrigerator door , then

separate the small cap . Move the cable

from left to the

corresponding position on the right. Install the small cap ,

then install the small cap on the corresponding position on

the right.

10 11

26 29

3 1

3 2

Install the hinge lower and the freezer door , then install

the hinge middle . Separate the cap on the freezer. Install

the freezer door, take the hinge upper out of the alternate

bag and install it on upper left. Pull out the wire from the

individual holes and connect these cables. Take the small caps

out of the alternate bag, then install the small caps. Install

base cover .

7. Separate the cap on the right side of the door, then install it

into the left screw hole (you can see this hole after the left handle

is removed). Install the handle and the screw which previously

separated on the corresponding position on the right. (The

hidden handle does not need this procedure) Then Installation

completed.

Note: Reversing the doors is not covered by the

warranty.

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

LG GA-B379UVQA Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühlschränke LG GA-B379UVQA