LG LV880 Bedienungsanleitung PDF herunterladen (Seite 10)

Recording using VIDEO Plus+

VIDEO Plus+ simplifies the process of recording television programmes. It works by entering codes that contain all the

necessary information for recording. These are called PlusCodes and can be found in most television listings magazines.

You must tune and store channels as set out on page 5 and set the clock to the correct time before using VIDEO Plus+.

VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.

The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

VIDEO Plus+

VIDEO Plus+ will only work if all the

channels have been tuned and

stored. The clock must also be set to

the correct time, see page 11.

1 Turn on your Video Recorder and

your television. Insert a recordable

video tape.

2 Press the VIDEO Plus+ button on

the Remote Control.

3 Use the 3 or 4 buttons to select

the recording type:

ONCE will be a single recording

event.

DAILY will record each week day

at the same time.

WEEKLY will record on the same

channel at the same time each

week.

4 Use the numbered buttons to

enter the PlusCode of the

television programme you wish to

record. If you make a mistake

press the 1 button and re-enter

the correct numbers.

5 Press OK and the recording

details of your programme will be

displayed. If PLEASE CHECK is

displayed check that you have

entered the right PlusCode.

If the number has been entered

correctly but does not work, it

may have been printed incorrectly

in the television listings guide.

If ‘- -’ is displayed on the “PR” you

will have to enter the programme

number that you want to record

from. This will only happen once

for each channel, once done it will

be stored in the Video Recorder’s

memory. If you wish to record from

the scart socket or RCA socket on

the front press AV.

6 Use the 2 button to move to the

PDC section. Use 3 or 4 to

switch PDC off or on. If you are

recording from a television station

which does not broadcast PDC

this option should be turned off.

Use the 2 button to move to the

selecting the speed section.

7 Use the 3 or 4 buttons to

choose among Standard Play,

Intelligent Play and Long Play, as

described on page 8.

IP mode determines how much

tape is left and switches speed

from SP to LP, if necessary, to

complete recording the

programme.

IP mode is not applicable when

PDC is on.

8 Check the details are correct and

press to save your settings.

If PLEASE CHECK is displayed

check that the details are correct.

If you wish to set other VIDEO

Plus+ recordings repeat steps 2-7.

Press again to remove the

menu.

9 Turn off the Video Recorder,

TIMER will be illuminated on the

Display panel.

10 Press STOP 9 to end recording.

Protect your recordings

To stop a recording you have made

being recorded over, break off the

protection tab on the rear of the video

tape. To record on a tape that has

had its protection strip removed,

cover the hole with adhesive tape.

Recording tape to tape

You will need a second Video

Recorder for tape to tape copying.

Connect using a SCART cable from

the back of your Video Recorder or

using the AV sockets on the front.

Select audio/video mode on the

recording Video Recorder by

pressing the AV button on the

Remote Control. To monitor the

recording, connect the recording

Video Recorder to your TV using the

standard coaxial aerial cable.

ONCE

0~9,

VIDEO PLUS+ CODE NO.

- - - - - - - - -

REC

GC985/967NP1 NA4ULL-ENG 3/17/04 9:00 AM Page 10

(LV890 Only)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

LG LV880 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kassettenrekorder LG LV880